1. Story Ruger Drop In Cylinder for the Single 6 New Model. Cylinders will be hot blued. Al Story has been manufacturing drop in cylinders for Ruger pistols for six years. Rim fire cylinders manufactured out of 1144 steel.
|6 Shot||22 LR||$100|
|8 Shot||22 LR||$120|
|10 Shot||22 LR||$139.95|
|6 Shot||22 Mag||$100|
|8 Shot||22 Mag||$120|
|6 Shot||17 Cal. HM2||$100|
|8 Shot||17 Cal. HM2||$120|
|8 Shot||17 Cal. HMR||$120|
2. Story Barrel Vise This heavy duty vise is 7 inches wide, six inches tall and two inches thick and provides enough clamping force to remove even the toughest barrels. Includes one set of aluminum bushings with a 1.250" inside diameter to fit most factory and aftermarket rifle barrels. Additional bushings may be purchased for $12 a set. Dealer Pricing.
|3. Story Ruger Single Six .17 Conversion Converts Your Single Six into a Fun, Accurate .17. Quality, Green Mountain barrel and CNC machined cylinders change the caliber of your Single Six to .17 HMR or Mach II. Button rifled, 1-9 twist barrel is machined from chrome moly steel and has an attractive blue-black finish. Plus, it's drilled and tapped for the ejector rod housing with an extra long barrel face to allow custom fitting of the barrel/cylinder gap. Includes a factory-spec front sight (installed). Non-fluted cylinder is machined from 1144 steel and is available for .17 HMR or .17 Mach 2. SPECS: Barrel- 4140 chrome moly steel, black oxide finish. Approximately 6" (15.2cm) long. 21/32" (16.6mm) O.D. Cylinder- 1144 steel, black oxide finish. 1 13/32" (3.6cm) long. 1 13/32" (3.6cm) O.D. May require Gunsmith Fitting.|
|.17 Mach 2 Single Six Cylinder||$100|
|.17 HMR Sgl. Six Cylinder||$100|
|.17 Single Six Barrel||$69.58|
|4. Story Ruger Cyclinder for Super Blackhawk available with removable bushing Ready to Fit & Chamber for Popular Cowboy Action and Hunting Cartridges. High quality, six-shot, cylinder makes it easy and economical to build in a custom, large frame Ruger single action revolver for cowboy shooting or big game hunting. Outside diameter, as well as the timing ratchets and locking notches are pre-cut to save time and effort. Bored undersize to .304", ready for you to ream the final chamber. Oversize length allows precise fitting to the factory frame for soild lockup and superior accuracy. Cylinders are available standard or with a seperate, pre-fit base pin bushing similar to 1st/2nd generation Colts. Bushing is .020" oversize in length to allow correct fitting of cylinder-to-frame by the gunsmith. Unfluted (UF) for maximum strength. SPECS: 4140 chrome moly steel, in the white. Six chambers bored to .304" (7.7mm). I.D. For large frame, Old and New Style Ruger SA revolvers. Requires gunsmith fitting.|
|.304" standard 5H119x95||$159.95|
|Base Pine Bushing only||$40.00|
|5. Story Ruger five shot cylinder for Super Blackhawk Ready to Fit & Chamber for your Custom "Big Bore" Revolver. Heat-treated, steel sylinder is the economical way to convert your large frame, Ruger single action into a big bore revolver for hunting or recreational shooting (assuming you don't mind maximum recoil and loose fillings!). The outside diameter, timing ratchets and locking notches are pre-cut to help minimize delicate and tedious machining operations. Five chambers are bored undersize for line reaming with a .375' pilot. Oversized cyclinder O.D. gives maximum wall thickness for popular, large bore, revolver cartridges. REquire permanent modification ot frame and retiming of action. Gunsmith installation required. SPECS: 4140 chrome moly steel, in the white. 1.980" (5.03cm) long x 1.800'(4.57cm) for highly skilled gunsmith only, instructions NOT supplied. O.D. Line ream using .375" (9.35mm) pilot. Requires gunsmith fitting including, but not limited to machining of frame and retiming of action.|
Five Shot Cylinder   $230.00
|6. Story Ruger Blackhawk Ejector Rod Housing. Replaces the Factory Aluminum Parts. Made from durable, machined steel that wears longer and functions smoother than the factory aluminum part. Increased weight helps cut down muzzle flip. High-lustre blue finish adds a touch of class to your Ruger Blackhawk revolver. SPECS: Steel, high-lustre blued. 4" (10cm) long, 1/4" (6.3mm) wide. Fits Blackhawk with 7 1/2", 5 1/2", and 4 5/8" barrels. Older guns, with silver brazed studs, use the 1/4" model. New guns use .200" model.
|E/R Housing 1/4"||$28.75|
|E/R Housing .200"||$28.75|
|7. Story Ruger Blackhawk Birdshead Ejector Rod Large, Round, Button is Easy to Hit. Dished button provides excellent finger purchase for fast, sure ejection. Patterned after the "Bullseye" style ejector used on original Colts. Fits all models of Blackhawk and Vaquero. SPECS: Steel, blue, polished fisnish. 4" (10.4cm) long .48" (12mm) dia. button. May require minor fitting.|
Birds Head Ejector   $28.75
|8. Ruger 10/22 Barrel Band Strong Replacement Band for An Attractive Look & Secure Fit. Rugged, machined steel bank replaces factory alloy band and matches barrel finish. Machined to original dimensions, band is blued to either a gloss or matte finish to dress up and customize your fifle. Due to variations in manufacture of original firearm, some minor gunsmith fitting may be require to achieve proper fit. SPECS: Machined steel, matte or glass blued finish. Fits Ruger 10/22 only.
|Ruger 10/22 Barrel Band, Gloss Blue||$25.95|
|Ruger 10/22 Barrel Band, Matte Blue||$25.95|
|9. The BRC Muzzle Brake will reduce recoil by 50%. The recoil of a 300 Ultra will have the recoil of less than 308 Win.. Mfg. out of 1144 stree proof steel and is 2 1/2' long. Muzzel brake comes in two thread sizes, 1/2"-28 and 5/8"-24.
|Muzzel Brake only blued ||$65.00|
|Installation on customer barrel ||$35.00|
|Installation on barreled action ||$50.00|